This is the crux of the Spin-Knit System. It is multifunctional. It is designed to come apart and reassemble for various uses.
Prop the skiener between two chairs, sawhorses, or whatever. Then you can spin it around for reeling yarn. I use my dad's
old walker and use rubber bands to secure it.
After you have filled the two spools, the skiener is used to hold the while plying. All the dowels are precision fitted to the holes
except for the top dowel which has a twist off dowel cap. Always carry the REEL-SWIFT-SKIENER by holding from the top dowel.
If held from the sides it will come apart.
Once the yarn is plied from the skiener back to the Navajo spindle, it is reeled back onto the skiener. Then you can remove the center
dowel and spray the yarn, then set to dry. This will set the twist in the yarn. Then you can wind from the skiener into a ball.
I have used many different household items to do these functions, with only limited success. I developed this tool to make
your spinning easy and professional. I am sure you will enjoy it!
